Modular Holster Adapter

Modular Holster Adapter

SKU:
GEAR-MHA
$85.50
Current Stock:
Adding to cart… The item has been added
Description

Modular Holster Adapter

The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars. This clamping force in conjunction with the material, 0.190″ thick domestically produced 6061-T6 Aluminum, creates a ridged, flex free platform for holsters.

The MHA supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three-hole” pattern Safariland™ type holsters, and other brands of holsters that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adaptor will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adaptor provides three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. This allows the user to custom configure their holster’s cant and height based off personal preference and body size/type.

LEG STRAP KITS (LSK) SOLD SEPARATELY

Safariland™ is a Registered Trade mark of Safariland, LLC

Features:

  • Lightweight 6061 T6 (2 ounces heavier than the UBL)
  • Non-Reflective Finish
  • Milspec Type III, Class 2 Hardcoat anodized finish
  • (2) color matched MOLLE/belt attachment bars
  • All hardware needed to attach to Safariland “3-hole” pattern holsters.
  • All hardware included to attach QLS type quick detach plates (use our hardware)
  • (3) Vertical holster height adjustment points at .500” increments
  • 20 degrees of holster cant adjustment 10 degree forward, 10 degree rearward
  • Leg strap compatible
  • Zero changes in performance in extreme cold or heat
  • Adapters available for these holsters:
    • G-Code RTI wheel
    • G-Code SOC, OSL and XST Holsters.
    • Blackhawk Omnivore
    • Blackhawk T-series
    • Blackhawk EPOCH
    • Alien Gear Rapid force
    • Dara Duty Holsters
    • Any Holster that uses the standard Safariland 3-hole pattern
  • Available in Black and Earth Brown
  • Made in USA

 

 

 

MECH Battle Belt Overview

MHA Installation

Modular Holster Adapter

The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars. This clamping force in conjunction with the material, 0.190″ thick domestically produced 6061-T6 Aluminum, creates a ridged, flex free platform for holsters.

The MHA supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three-hole” pattern Safariland™ type holsters, and other brands of holsters that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adaptor will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adaptor provides three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. This allows the user to custom configure their holster’s cant and height based off personal preference and body size/type.

LEG STRAP KITS (LSK) SOLD SEPARATELY

Safariland™ is a Registered Trade mark of Safariland, LLC

Features:

  • Lightweight 6061 T6 (2 ounces heavier than the UBL)
  • Non-Reflective Finish
  • Milspec Type III, Class 2 Hardcoat anodized finish
  • (2) color matched MOLLE/belt attachment bars
  • All hardware needed to attach to Safariland “3-hole” pattern holsters.
  • All hardware included to attach QLS type quick detach plates (use our hardware)
  • (3) Vertical holster height adjustment points at .500” increments
  • 20 degrees of holster cant adjustment 10 degree forward, 10 degree rearward
  • Leg strap compatible
  • Zero changes in performance in extreme cold or heat
  • Adapters available for these holsters:
    • G-Code RTI wheel
    • G-Code SOC, OSL and XST Holsters.
    • Blackhawk Omnivore
    • Blackhawk T-series
    • Blackhawk EPOCH
    • Alien Gear Rapid force
    • Dara Duty Holsters
    • Any Holster that uses the standard Safariland 3-hole pattern
  • Available in Black and Earth Brown
  • Made in USA

 

 

 

Advanced Patrol Outer Carrier

The Advanced Patrol Outer Carrier (APOC) represents the forefront of duty gear design, offering a blend of superior protection and adaptability. Engineered to accommodate both soft and hard body armor within its plate bags, the APOC ensures exceptional safety and comfort for patrol officers and tactical professionals.

Crafted from premium materials, the APOC stands up to the rigors of demanding environments, providing unwavering durability and reliability.

OPTIONS

  • Size: BALCS Small, BALCS Medium, BALCS Large, BALCS XLarge
  • Placard: Optional MOLLE placard
  • Cummerbund Attachment: ROC Buckles and FIRSTSPEAR® TUBES™ Buckles

Color: Black, Ranger Green, Coyote, Multicam, Multicam Arid, Multicam Black, Multicam Tropic, Woodland, Wolf Grey, and Navy

FEATURES

  • Dual Pocket Design for use with soft armor and hard body armor as needed
  • Includes exclusive 7-inch Hybrid MOLLE cummerbund
  • Includes removable Belly Band
  • Optional MOLLE Placard
  • Zippered admin pocket
  • Name Tape above admin pocket
  • Compatible with pin and velcro badges
  • 6” x 4” Chest MOLLE/Loop field for ID Patches or use with EUD’s
  • 2 Removable QASM buckles for GTSR placard use (G-Hook placard compatible)
  • 8” x 5” Rear Loop panel and MOLLE field for ID Patches or PID markers
  • Rear cover secures the cummerbund attachment
  • 3D mesh liner for enhanced comfort
  • Overlapping shoulder straps allow a wide range of adjustment and cable pass-through
  • Internal Plate adjustment straps ensure proper fitment of a variety of plates

 

Handmade in Winona, MN

Check out the size chart tab to help you choose the correct fit for Plates.

*Due to possible unforeseen industry supply shortages, OCP laser cut laminate may be substituted for Multicam in certain cases.*

 

APOC SIZING GUIDE

KEY POINTS

  • Carrier Size Aligns with Plate Size: Your shirt or body size doesn't determine the carrier size.
  • Plate Variability: Keep in mind that plate dimensions can differ by ±1" between manufacturers.
  • Max Thickness: Our plate bags accommodate hard plates up to 1.2" thick.

CARRIER SIZING BASED ON HARD PLATE DIMENSIONS

  • Small: Designed for 8.75" x 11.75" & Commercial 10"x12" plates (SAPI, ESAPI, Shooter, Swimmer)
  • Medium: Designed for 9.5"x12.5" & Commercial 10"x12" plates (SAPI, ESAPI, Swimmer)
  • Large: Designed for plates up to 10.5”x13.5" (SAPI, ESAPI, Swimmer)
  • X-Large: Designed for 11" x 14" plates (SAPI, ESAPI, Shooter, Swimmer)

CARRIER SIZING BASED ON SOFT ARMOR DIMENSIONS 

  • Small: BALCS Size Small
  • Medium: BALCS Size Medium
  • Large: BALCS Size Large
  • X-Large: BALCS Size X-Large

PROPER FITMENT & PLACEMENT

  • Avoid Oversizing: Oversizing can compromise your shooting stance and mobility due to extra weight.
  • Ideal Placement: The plate bag should align from your jugular notch to your belly button vertically, and from nipple to nipple horizontally.

Choose your carrier carefully, ensuring it fits your soft armor, hard plates and your body for optimal performance.

Related Products
  • Front View Holster Sleeve TQ in Ranger Green
    Quick view View Options
  • Front view of the Sidekick adapter for Double and Single row Molle pouches in Ranger Green
    Quick view View Options
  • Angled Pouch Adapter
    Quick view View Options
  • Adaptable Mission Pack
    Quick view View Options